Installation Guide

European Siding System-Horizontal Installation Guide / v20210324US 22
Click to return to Content Table
Diagram 7
Detail 7-1
7
Put the second board over the first
board's Clip (AW08) and fasten it onto
the furring strip with the Clip (AW08), as
shown in Diagram 7 , Detail 7-1 , Detail 7-2 .
Wall
Outside
Corner Trim
(UH51)
Board
(UH46)
Gap for
Expansion &
Contraction
Gap for
Expansion &
contraction
Detail 6-5
Installing the Second course
Board (UH46)
Clip
(AW08)
Detail 7-1
Note:
Since the composite wood must allow
for expansion and contraction due to
temperature change, the board must be
locked at one fixed point but only one
point to allow the remaining board to

  lock the Clip (AW08) at
the middle of each board, as shown in
Detail 7-1 
DO NOT LOCK any other Clips (AW08) for

Please review page 13 , "Locking the
Siding Board" of this installation guide for

Lock the Clip
at the middle
of each board
with a screw
Clip (AW08)
At the middle
of the board
Board
(UH46)