Installation Guide

European Siding System-Horizontal Installation Guide / v20210324US 26
Click to return to Content Table
11
Put the cut siding board over the Clip
(AW08) in place and then face x it onto
each furring strip along the length of the
board against the Rubber Stopper (T-7),
as shown in Diagram 11 .
Detail 10-1
Cut Board (UH46)
Diagram 11
Option 1
Finish the top with cut F-Trim (UH50):
Install the last board, as shown in Detail 11-1 .
Wall
Furring
Strip
Finish the top with
Cut F-Trim (UH50)
Cut
Board
(UH46)
Face Fixing
the board
onto the
furring strip
Detail 11-1
Option 2
Finish the top with Metal Flashing:
Install the last board, as shown in Detail 11-2 .
Wall
No Finish the top or
Finish the top
with metal flashing
Furring
Strip
Cut
Board
(UH46)
Face Fixing
the board
onto the
furring strip
Detail 11-2