Installation Guide

27
European Siding System-Horizontal Installation Guide / v20210324US
Click to return to Content Table
12
There are two options to nish the top of
the siding.
Finish the Top
Finish the Top
Diagram 12
Option 1
Using F-Trim (UH50):
Cut the F-Trim (UH50) to make the centerpiece
shorter without interfering with the Rubber
Stopper (T-7), as shown in Detail 12-1 .
Then put the cut F-Trim (UH50) in place and
secure it onto the furring strip with screws, as
shown in Detail 12-2 .
Cut
F-Trim (UH50)
Detail 12-1
Option 2
Using Metal Flashing:
Put a Metal Flashing over the top of the siding
and x it onto the furring strip with screws, as
shown in Detail 12-3 .
Wall
Sealant Glue
Board (UH46)
Cut F-Trim (UH50)
Furring
Strip
Detail 12-2
Wall
Sealant Glue
Board (UH46)
Metal Flashing
Furring
Strip
Detail 12-3