Installation Guide

Siding Installation Guide / v20190507US 10
Locking the Siding Board
Every AW-08 clip comes with a separate hole in the case there is a need to lock the board. The Siding
boards will expand and contract and to take care of this movement, we must lock the board in one
position and then allow the board to expand and contract readily in the other direction.
You can see how we lock the board in Diagram 1, 2, and 3.
Note: DO NOT LOCK EVERY BOARD. General rule of thumb is every board will only need one locking/
xation point.
Note: We recommend using the I Trim if you need to bu joint more than two boards together.
DIAGRAM 1 DIAGRAM 2
DIAGRAM 3
Locking
Expansion and Contraction
Locking
Expansion and Contraction