Installation Guide

Deck Tile Installation Guide / v20170809 3
Cuing
Cutting the Deck Tile is simple and quick. Just
remember that you need a carbide tip blade
when cutting.
Removing Tiles:
Corners/Edges
DIAGRAM 8
DIAGRAM 9
DIAGRAM 10
DIAGRAM 7
Finally, attach the last two connectors and
push down to lock everything into place as
shown in Diagram 7.
5
Repeat steps 1-5 until deck is completed.
6
2
Next, with the gripping the tile pull up
towards your body while the other hand
pushes down on the adjacent tile as shown
in Diagram 9.
2
Next, take the piece and redraw the
measured area that you will be cutting onto
the Deck Tile.
3
Continue to pull with the gripped hand until
finally all connectors are separated from
the adjacent tile as shown in Diagram 10.
1
If a tile needs to be removed, the best way
is to rst have one hand grip one tile’s edge
and the other to be on the adjacent tile as
shown in Diagram 8.
1
First, measure the corner/edge that will
need to be cut as shown in Diagram 11.
DIAGRAM 11