Installation Guide

ManualsBrandsNewTechWood ManualsDeck TilesUltraShield Naturale 1 ft. x 1 ft. Quick Deck Outdoor Composite Deck Tile Sample in Multicolor

1

2

3

4

5

6

Deck Tile Installation Guide / v20170809 4

Then, take the Deck Tile and cut either

with a circular saw, table saw, hand saw, or

jigsaw. Always remember to use a carbide

tip blade on these tools as shown in

Diagram 12 & 13. The nal piece we cut for

this corner is shown in Diagram 14.

Note: Before cutting, always turn the

Deck Tile over and make sure that the

cut lines you have marked on the Deck

Tile do not cross over any screws on the

back. Never ever should you be cutting

through the screws. If your lines cross

over these screws, first unscrew the

screws and then cut the Deck Tile.

3

DIAGRAM 12

DIAGRAM 13

DIAGRAM 14

4

Now, take the Deck Tile and sand down the

sides of the cuts to make them smooth as

shown in Diagram 15.

DIAGRAM 15

5

Finally, put the nished piece in its corner/

edge as shown in Diagram 16.

DIAGRAM 16