Manualshelf

Installation Guide

ManualsBrandsNewTechWood ManualsBuilding materialsAll Weather System 2.2 in. x 2.2 in. x 8 ft. Composite Siding End Trim in Peruvian Teak Board
11121314151617181920
Siding Installation Guide / v20190507US 11
DIAGRAM 5
DIAGRAM 4
DIAGRAM 6
Framing
The frame needs to be completely level before installing any Siding boards.
Note: Adequate spacing in the joists is required to keep the cladding boards from bending. Please
review page 6 of this installation guide to see what spacing is required.
1
First start by fixing the joist onto the wall
you plan to install on.
2
Next, the span needs to be measured for
the next joist. Please review page 6 for the
maximum span allowed from the center of
center of each joist.
Diagram 7 shows the final installation of
the rst joist.
DIAGRAM 7
The wall as shown in Diagram 4 will be installed
to replicate different scenarios potentially
occurring when installing the Siding.