Installation Guide

Siding Installation Guide / v20190507US 12
DIAGRAM 8
DIAGRAM 9
Diagram 9 is an above cross section view of the
inside corner after installation. The inside corner
was first installed onto the joists and then the
boards were slotted into both openings when
installed.
1
The inside corner will be installed as shown in
Diagram 8 by rst pre drilling and then xing
with screws.
Inside Corner Trim
DIAGRAM 10
1
The starting strip will now be installed on the
bottom of the joists as shown in Diagram 10
by first pre drilling into the AW-02 and then
xing with screws.
2
Repeat step 1 and install the rest of the
starting strip onto the rest of the joists. The
nished starting strip across the joists can be
see in Diagram 10.
Starting Strip
Option 1:
Installing the Trims and then Boards