Installation Guide

ManualsBrandsNewTechWood ManualsBuilding materialsAll Weather System 2.2 in. x 2.2 in. x 8 ft. Composite Siding End Trim in Peruvian Teak Board

Siding Installation Guide / v20190507US 13

DIAGRAM 13

DIAGRAM 12

2

Place the AW-08 on the board and install

with screws as shown in Diagram 12. Please

review page 10 of this installation guide on

how to lock the board with AW-08.

Note: A gapping of at least 25/64 inch

(10 mm) needs to be le at the boom

of the ground and the lip of the board to

allow for expansion and contraction and

ventilation.

3

When you are on the last board of the Siding

you will need to first install T-7. The T-7 will

be installed onto every joist rst and then the

Siding board will be installed like normal as

shown in Diagram 13.

Note: The T-7 is used as a place holder

for the last board, so that the board will

not slant.

DIAGRAM 11

1

Take a Siding board and place the side with

the lip down as shown in Diagram 11.

Siding Board