Installation Guide

Siding Installation Guide / v20190507US 15
DIAGRAM 18
DIAGRAM 17
1
Now you are ready to install the other side
of the wall as Diagram 18. Repeat steps 1-2
of starting strip on page 12 of this installation
guide.
2
Then, repeat steps 1-3 of Siding board on
page 13 of this installation guide. Continue to
the top for a nal nish as shown in Diagram
20.
Siding Board
Diagram 17 is an above cross section view of the
outside corner after installation. The outside was
installed after the Siding was installed on one of
the walls. Then, the outside corner was pushed
into the opened side of the Siding and screw xed
from the other side.
DIAGRAM 16
2
Fix the outside corner by screwing on the
opposite face of the outside corner.
Note: Always pre-drill before screwing
unless using composite screws designed
for non pre-drilling. The distance
between each screw should be no more
than 12 inches (300 mm) center to center.