Installation Guide

ManualsBrandsNewTechWood ManualsBuilding materialsAll Weather System 2.2 in. x 2.2 in. x 8 ft. Composite Siding End Trim in Peruvian Teak Board

Siding Installation Guide / v20190507US 33

DIAGRAM 69

DIAGRAM 70

DIAGRAM 68

5

Install the cut F trim pieces over the cut

composite Siding as show in Diagram 69 and

70.

Note: Always pre-drill before screwing

unless using composite screws designed

for non pre-drilling. The distance

between each screw should be no more

than 12 inches (300 mm) center to center.

4

Take the F trim and cut to match the corners

of the window as shown below in Diagram 68.

6

The completed window installation should

look like Diagram 71.

DIAGRAM 71