Installation Guide

Siding Installation Guide / v20190507US 34
DIAGRAM 74
DIAGRAM 75
DIAGRAM 73
2
First install the AW-02 starting aluminum
strip to the joist as shown in Diagram 73.
3
Next take the rst board and install it on the
AW-02 strip as shown in Diagram 74.
4
On each joist place an AW-08 clip and fix
the clip to the joists as shown in Diagram 75.
Note: One of the clips needs to lock the
board, if you are unfamiliar with this,
please go to page 10 of this installation
guide to understand how to lock the
board with AW-08.
5
Take the next board and slide it over the
clips positioned on the rst board as shown
in Diagram 76.
DIAGRAM 72
1
The span for the ceiling should be 12 inches
(300mm) center from center as shown in
diagram 72.
Ceiling Installation