Installation Guide

Siding Installation Guide / v20190507US 35
DIAGRAM 76
DIAGRAM 77
DIAGRAM 78
DIAGRAM 79
DIAGRAM 80
6
Repeat steps 4, 5, and 6 and install the rest
of the boards as shown in Diagram 77.
7
Install a 3/10 inches (8 mm) thick wood piece
on each joist or a strip that is 3/10 inches
(8 mm) thick for installing the last board as
shown in Diagram 78.
8
Place the last board and pre-drill as shown
in Diagram 79.
9
Next take screws and x the joists through
the pilot holes as shown in Diagram 80.
Note: Do not over tighten the screws.