Instructions / Assembly

U
6' Traditional Fence Installation Guide / v20221212US 3
Risks and Liability
-Check and verify underground utilities' locations
-Check with local and regional building codes
-Check and verify your property lines and boundaries.
Safety
Wear appropriate safety equipment to avoid any risk of injuries but is not limited to the
following safety equipment: gloves, safety glasses, long sleeves, and pants.
Tools
Always use the proper tools for installation, such as woodworking tools:
Acclimation
- Acclimating at least 24 hours prior to installation is recommended.
- Acclimating the boards will eliminate any unwanted shrinkage issues seen during and
after installation.
Please Note:
Always remember when allowing the picket boards to acclimate at the job site, it is
essential to put them on a flat and even surface. If placed on an uneven surface, the
picket boards could warp to the shape of the terrain.
Storage
- Picket boards should be stored and transported horizontally
- Picket boards should always need to be stored on at solid surfaces.
IMPORTANT Note:
Read All Sections Before You Start
For the most up to date information, please visit our website @ www.newtechwood.com