Instructions / Assembly
U
6' Traditional Fence Installation Guide / v20221212US 6
Diagram 3
Install Fence Pickets
3
3.1 To keep the tops of the pickets even, tie the mason line between the posts at the
desired height. Attaching the furring strips to the post if needed.
3.2 Must pre-drill the screw holes with a smaller drill bit before fastening the pickets
to stringers with screws.
3.3 Fasten the pickets with two composite screws per stringer. Offset the screws, as
shown in the
Detail 3-1.
3.4 Use a level to plumb the rst picket.
3.5
Use a spacer block to set the consecutive pickets. Use the spacer block at the
middle and bottom of each picket.
3.6 If there is a spacing between the pickets, use a spacer to help keep the spacing
even.
3.7 Frequently use a level to check the pickets to keep them plumb.
6OIQKZ
)USVUYOZK9IXK]Y
*KZGOR
)USVUYOZK9IXK]Y
Detail 3-1