User Manual

Page | 104
The Choose Connection Type dialog switches allow you to select between Browser
Based, RTMP, Windows Media Pull and Windows Media Push streaming protocols.
FIGURE 90
FIGURE 91
2. Select Windows Media Pull, click
OK, and then supply a name for
this Connection preset.
3. The next thing to do is to choose
a streaming profile that provides
a suitable resolution and bitrate
from the Resolution menu
(Figure 91).
4. Click the Test button.
In a few moments, TriCaster displays the IP (Internet Protocol) address of your
computer as viewed from the network. This information is provided as a
‘punctuated’ numeric value in the Location display field.
Hint: If your TriCaster is connected to the network by a router or is behind a firewall, it
may be necessary to take further steps to provide external access. See Chapter 18,
Streaming for a more elaborate explanation.
5. Close the Configure Stream Connection panel now, and click the Stream
button.
You’re streaming! You can provide clients (or streaming providers supporting Pull
streaming) the Location address. Entering this into the File menu of Windows Media