User Manual

Page | 149
with the addition of individual source options. Naturally, analog connection options
are not required.
Note: HDMI display devices will typically show black when if they do not support video
displays of the format (resolution, etc.) selected as source in Output 4’s Video menu.
8.1.2 STREAM AND NETWORK
FIGURE 128
Like other output options, TriCaster’s Network and Stream outputs can be
independently configured to use different Video and Audio sources. The selections
are the same as are offered for Output 4 above.
Network Output sends audio and video across a LAN (Local Area Network) to the Net
inputs of another TriCaster, and is enabled or disabled using the switch at left.
Hint: Take special note that the Source drop-down menu for Network provides a De-
Interlace item, for output targets where that would be a valuable option).
Streaming Output is more complex, since there are so many different ways to
stream. In this panel, you can configure the audio and video sources sent to output.
All other options and settings relevant to streaming are located in the Streaming
Configuration panel – see Chapter 18 for a full discussion of this important topic.
TRICASTER 8000 DISPLAY OUTPUTS
FIGURE 129