User Manual

Page | 290
Right-clicking opens the shortcut row menu. When done, click the Apply button (or
Cancel to close the editor without saving your changes).
Hint: Use the Record button in the foote rof the Editor to insert newly recorded entries
into the current at the selected line.
SECTION 17.6 REMOTE CONTROL
(TriCaster 8000 only) In high-end broadcast applications and multimedia
production environments, it can sometimes be quite important for redundant
TriCaster systems to be operating synchronously.
FIGURE 299
The Options menu (Live Desktop Dashboard) contains the item Control System(s)
Remotely. Selecting a suitable TriCaster 8000 unit in this menu checkmarks it;
subsequently, the all command operations given to the local unit are echoed to the
controlled TriCaster, which will follow along submissively.
Tip: Mirrored systems should be running identical software versions, specifically Rev.1c
or better.
17.6.1 ‘TWINNING’ TRICASTERS
For most purposes, media content and all initial control states of both local and
controlled systems must be absolutely identical in order for remote control (a.k.a.,
‘mirroring’) to work as expected. Thankfully, achieving this ‘twinned’ state is not
that difficult.
1. Configure the first TriCaster: