User Manual

Page | 364
To delegate the joystick to control a PTZ camera assigned to a specific TriCaster
input, hold down SHIFT button on the control surface and press a button (1-8) in the
M/E Delegate group. (Afterward, the button corresponding to the current PTZ
camera selection will light whenever SHIFT is pressed.)
 Pan: With SHIFT depressed, tilt the joystick left-right.
 Tilt: With SHIFT depressed, tilt the joystick backward-forward.
 Zoom: With SHIFT depressed, twist the joystick clockwise or counter-
clockwise.
 Focus: When Auto is off, and with SHIFT + CTRL both pressed, twist the
joystick clockwise or counter-clockwise.
o Auto Focus toggle: With SHIFT + CTRL held down, press the joystick
button.
 Preset selection: Press CTRL + LIVESET SHOT (1-8) to choose a preset for the
selected camera.
 Press CTRL + RATE (M/E Transition group) to adjust the camera’s Animation
Speed.
Hold down CTRL and press the top joystick button to update the current PTZ preset
(position, zoom and thumbnail icon).
SECTION 22.4 TRICASTER™ 460 CS & 860 CS
The principle difference between these two members of the TriCaster family of
control surfaces is the number of channels supported by their namesake TriCaster
live production system.
TriCaster 860 CS is a bit wider than the 460 CS, as necessary to support the
additional channels offered by the larger TriCaster. As well, a few control groups are
in slightly different locations on the two control surfaces.