User Manual

Page | 367
When initially selecting multiple delegates, as often as not the settings and states of
the individual members selected will vary. For example, when you delegate several
M/Es at once, the Overlay Transition Rate of each member of the multi-selection
could be different. Generally, wherever it makes sense to do so, when you make
adjustments to settings for multi-delegated groups, the settings will be
progressively synchronized. For example:
 The Zoom Rate for V1 is set to “S”; V2 is set to “M”; V3’s Zoom Rate is “F”.
 You multi-delegate these three M/Es.
 You push the Zoom Rate button once. The rate for V1 increments to “M”.
(V2 and V3 are not affected.)
 You push the Zoom Rate button again. The rate for both V1 and V2 are
incremented to “F”; the Zoom Rate for all three delegated M/Es is now
synchronized.
You will see this synchronization method applied to the following controls:
 Media Players > Loop, Autoplay and Single
 Transition>Rate
 Transition>Select
 M/E > (Overlay) Trans Rate
 M/E > (Overlay) Trans Select
 M/E > Zoom Rate
 M/E > Overlay display state
22.4.4 SWITCHER CONTROLS
FIGURE 348