User Manual

Page | 377
JOYSTICK MODES
Generally, changes resulting from joystick operations are governed by the current
Joystick Mode. Mode selections are mutually exclusive (only one buttons is
illuminated at a time).
Also note that when the active Positioner DELEGATE is either Virtual Zoom or
Shuttle, the Joystick Mode is irrelevant, and is ignored.
POS/SCALE
 Move the joystick horizontally, vertically or diagonally (as viewed from
above) to move delegated video source(s) on its X and Y axes.
 Twist the joystick clockwise to scale delegated source(s) up, or counter-
clockwise to scale down.
Hint: When multi-delegate selections are active for the Positioner, adjustments are
generally relative to the current state for individual delegates, as opposed to
absolute.
ROT (ROTATE)
When the POSITIONER DELEGATE selection is anything other than VIRTUAL ZOOM
or SHUTTLE:
 Move the joystick horizontally (as viewed from above) to rotate delegated
sources on the Y axis.
 Move the joystick vertically to rotate delegated sources on the X axis.
 Twist the joystick clockwise/counter-clockwise to rotate delegated sources
on the Z axis.
CROP
Except when the POSITIONER DELEGATE selection is VIRTUAL ZOOM or SHUTTLE:
 Twist the joystick clockwise (as viewed from above) to crop delegated
sources inward on all 4 edges, maintaining the original aspect ratio.