User Manual

Page | 381
To delegate the joystick to control a PTZ camera assigned to a specific TriCaster
input, hold down SHIFT button on the control surface and press a button (1-8) in the
M/E Delegate group. (Afterward, the button corresponding to the current PTZ
camera selection will light whenever SHIFT is pressed.)
 Pan: With SHIFT depressed, tilt the joystick left-right.
 Tilt: With SHIFT depressed, tilt the joystick backward-forward.
 Zoom: With SHIFT depressed, twist the joystick clockwise or counter-
clockwise.
 Focus: When Auto is off, and with SHIFT + CTRL both pressed, twist the
joystick clockwise or counter-clockwise.
o Auto Focus toggle: With SHIFT + CTRL held down, press the joystick
button.
 Preset selection:
o Use CTRL + Zoom preset (1-4); add SHIFT to the above combination
for presets (5-8).
 Press CTRL + ZOOM RATE to adjust the camera’s Animation Speed.
 Hold down CTRL and press the top joystick button to update the current PTZ
preset (position, zoom and thumbnail icon).
SECTION 22.5 TIMEWARP™
This chapter discusses the use of two NewTek TimeWarp™ control surfaces in two
variants. Both models (TriCaster™ 850TW and its predecessor, TW-42) add
convenient slow motion instant replay to the already potent capability of your
TriCaster system.