User Manual

Page | 423
2. Refer to Section 17.6.1 for details of preparing the two TriCasters and
enabling Remote Control.
A.1.8 INSERT/REMOVE A DRIVE FROM TRICASTER’S REMOVABLE DRIVE
BAY
3. If TriCaster is running, and if applicable (not a TriCaster 410 feature) – Eject
the hard drive you wish to remove (see Section A.1.10).
4. Open TriCaster’s front panel.
5. Open the removable drive bay door.
FIGURE 396
6. Pull the hard drive currently in the drive bay (if applicable) to remove it.
7. Insert the new hard drive (‘connector end’ first)
8. Close the drive bay door.
9. Close TriCaster’s front panel.
SUPPLEMENTARY QUESTION:
Q: What hard drives are recommended for TriCaster’s removable drive bay(s)?
A NewTek supplied storage media has been carefully tested to meet exacting
specifications, and can be expected to provide optimal performance and reliability.