User Manual

Page | 35
i. Connectors 1a-(1b or 1d) provide sound from the mix assigned to
Output 1 (defaults to Master in Output Configuration)
ii. Connectors 2a-(2b or 2d) provide sound from the mix assigned to
Output 2 (defaults to Aux in Output Configuration)
Note: These two output groups are actually treated by TriCaster as four
independent stereo outputs, each configured and controlled separately;
see Chapter 15, Audio.
b. Digital audio – A separate digital audio connection is not necessary for
SDI output with embedded audio. AES/EBU connectors are provided for
Output 1(channels a-d) on 8-input models.
Hint: TriCaster’s SDI and analog output sections can be used simultaneously. For
example, you could use the Composite output to view your program on a local composite
monitor at the same time as you use the SDI connection to supply broadcast equipment.
3.8.3 SUPPLEMENTAL VIDEO OUTPUTS
Additional dedicated video outputs make it possible to connect monitors or
projection devices to TriCaster for a variety of purposes including program output
for IMAG (Image Magnification) installations or flexible monitoring for the
convenience of the operator.
1. TriCaster’s external Multiview output is supplied by a connector located
above the main Interface monitor connector (8-input models) or a
neighboring HDMI port (4-input models). Again, connect a suitable monitor
or display device. The new device should be recognized and enabled by the
system automatically.
The Multiview output offers a variety of optional monitoring layouts that can
be selected at any time in TriCaster’s Live Desktop.
2. TriCaster also provides an additional, assignable video output on a labeled
HDMI connector. Simply connect a suitable external monitor or device to the
connector on the backplane.