User Manual

Page | 57
controls. Slide the mouse down to the Load Default entry, revealing a sub-
menu showing different monitor layouts. Select Quad View.
5. Glance at the monitor display, and you’ll notice that it has updated. Switch
to the Interface A preset, then back to D.
Presets recall their last setting, so D continues to show the ‘quadview’
layout.
For TriCaster 8000, Workspaces can be modified beyond simply changing their
monitor layout, too.
6. With the Interface D preset active, reselect
the Load Default menu,
7. This time, choose the Cameras preset,
populating the Live Desktop monitors with
8 camera input monitors (plus Preview and
Program monitors).
8. Move the mouse pointer over the monitor
for Camera 1 and right-click to open the
Monitor Setup menu (Figure 42).
9. Slide down to the Mix Effects entry, and
select M/E 1 from the sub-menu.
10. Repeat this operation for the remaining seven camera monitors, selecting a
different M/E as the source for each monitor in turn.
The Interface D preset now displays individual monitors showing the output of
all M/Es after the associated effects are applied (including virtual sets, overlays,
etc.)
All TriCaster 8000 video monitors, including those in the Interface as well as
Live Desktop monitors, can be customized in similar fashion.
Hint :To restore default monitor layouts, simply activate the preset you want to modify,
click Workspace and select your preferred Default Layout,
FIGURE 41
FIGURE 42