User Manual

Page | 80
FIGURE 65 (TRICASTER 8000)
8. As before, click the Configure
button (gear) to open a setting
panel for the Grab feature.
The De-interlace option smooths
the results for fielded format
session, and is enabled by default.
9. Enter “test” (without quotes) in
the Base Name field.
10. Enable Capture stills from all
inputs (not available on TriCaster
410).
11. Enable the Add PGM grab to
switch, and click the nearby gear
button to select some destinations
(be sure to include DDR 1).
12. Close the Configuration panel, and click the DDR 1 tab (so you can see what
occurs next).
13. Click the Grab button.
Let’s consider the results of this single click:
 For a given Base name, the number in the Grab button’s counter display
rises by 1 each time you click Grab.
 The image(s) grabbed from output is stored at in a folder on the session
drive at (drive letter):\Media\Stills\(session name)\Capture.
 As well, a new thumbnail icon (named “test 1.jpg”, etc.) appears in the
DDR 1 playlist; you’ll see at a glance that it represents a still image from
Output 1.
 Notice too that the newly grabbed frame is added to any other
destinations (including the Publish Queue) you check-marked.