User Manual

P a g e | 226
22.8.2 LAYER DELEGATES
As mentioned above, some Joystick delegate modes let you further refine the target for
your manipulations. For example, when your primary delegate is MAIN, joystick
operations can be applied to the DSK 1, DSK 2, DSK 3 or DSK 4 video layers. The LAYER
delegate group determines which one will be affected.
Specifically, the KEY buttons labeled 1-4 direct joystick control to DSK 1-4 when MAIN is
selected as the primary delegate, or KEY 1-4 for an M/E. Similarly, when an M/E with a
LiveSet selected as the Background effect is delegated, the A, B, C and D buttons allow you
to target the individual Positioners for the main M/E layers (A-D).
Finally, the LIVE SET button targets the position and zoom settings for a virtual set.
22.8.3 CONTROL MODE
Let’s turn now to buttons that govern the Joystick operating mode.
FIGURE 270
POS/SCALE
• Move the joystick horizontally, vertically or diagonally (as viewed from above) to move delegated
video source(s) on its X and Y axes.
• Twist the joystick clockwise to scale delegated source(s) up, or counter-clockwise to scale down.
Hint: When multi-delegate selections are active for the Positioner, adjustments are generally relative to the
current state for individual delegates, as opposed to absolute.
ROT (ROTATE)
• Move the joystick horizontally (as viewed from above) to rotate delegated sources on the Y axis.
• Move the joystick vertically to rotate delegated sources on the X axis.
• Twist the joystick clockwise/counter-clockwise to rotate delegated sources on the Z axis.
CROP
• Twist the joystick clockwise (as viewed from above) to crop delegated sources inward on all four
edges, maintaining the original aspect ratio.
• Twist the joystick counter-clockwise to reduce cropping of delegated sources on all 4 edges.
FIGURE 269