User Manual

P a g e | 254
23.3.11 860 CS
FIGURE 305
Like the 450CS, functions assigned to buttons for an 860 CS largely conform to the TC1 SP, though placement
sometimes differs. Of course, the 860 CS has a higher Switcher row button count than its smaller sibling, and
there are other differences, too.
The default Switcher (and M/E row) layouts may or may not vary from Figure 305, depending on the system
model.
Hint: Hold SHIFT when making a selection on the KEY row of an M/E to select the KEY 2 source.
FIGURE 306
Too, note that the M/E delegate group has extra buttons (compared to the TC1SP or 450CS); these have been
assigned to functions associated with the PREVIZ feature, allowing you to copy the current M/E’s setup to
PREVIZ, and vice versa, along with MEM and COMP buttons.
M/E DELEGATES (1-4)
Use the M/E DELEGATE buttons to designate which M/E(s) the rows at left are assigned to.
Hint: Press SHIFT along with delegate buttons 1-4 to access M/Es 5-8 on models with eight M/Es.