Operating Instructions Please read the instructions carefully and keep it safe.
I. Appearance Instructions ①Watch case ②Power button ③Touch display ④ Strap ⑤Sensor ⑥Charging contact ⑦Charging cable II. Download and Install APP and Match 1. Long press the power button to power on; please make sure that the battery is full for the first time. If the battery is low, it cannot be powered on normally. 2. Use the mobile phone to scan the QR code on the right to download and install the APP; Or search for “QWatch Pro” in Apple Store/Android App Market to download and install.
III. Operational Instructions 1. Power on: long press the power button for 3 seconds to power on, and then enter the time interface 2. Power off: In the time interface state, long press the power button for 3 seconds to enter the power-off interface, and then long press the power button or the screen to confirm the power-off. 3. Brighten screen: Press the power button to brighten screen, or rotate wrist in the APP settings, so that the wrist is rotated to brighten screen. IV. Main Functions Instructions 1.
mobile phone language. If necessary, it can also set the language on the watch, and currently, it supports 20 languages; 3. Step-counting: Record the number of steps, sports mileage and heat consumed on the day, and synchronize the data with app; 4. Sleep: Automatically detect sleep time and status from 10: 00 pm to 8: 00 am, and synchronize data with app. It can detect data only by wearing a wristband to sleep; 5.
remote control photographing function and clicks “Start Photographing” to complete the photographing; IOS: enter the “Photographing Control” on the watch, turn on the camera on the mobile phone, and click “Start Photographing” to complete the photographing. 12.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
2. If other software such as mobile manager is installed in the user's mobile phone, in order to ensure the normal operation of background APP, please turn on the push notification and allow the background operation permission on the mobile phone, otherwise the notification cannot be pushed. 3. Charging requirements: use the charger with the specification of 5V 0.5~1A for charging. Please use a dedicated charging line for charging.
