User Manual

NexLink NL102 User Manual
10
4.2 DTC Lookup
The
DTC Lookup
function is used to search for definitions of DTCs stored in
the DTC library and for code breaker information.
1. From
Main Screen
(Figure 4.1), use the [
] / [ ] scroll button and [ ] /
[
] scroll button to select
DTC Lookup
and press the [
OK
] button.
2. From
DTC Lookup
screen,use the [
] / [ ] button to move to the desired
character,use the [
] / [ ] button to change selected digit/character and
press the [
OK
] button to confirm.
3. View the DTC definition on screen. When DTC definition covers more than
one screen,use the LEFT/RIGHT button or UP/DOWN button to view additional
information on previous/next screens.
4.3 Review Data
The Review Data function allows viewing of data from last test recorded by the
scan tool,including the codes,live data,I/M etc.
4.4 Setup
Select [Tool Setup] in the main menu and press [
OK
], the system will enter the
system setup screen:
1) Beeper:
Turn ON/OFF the Beeper. Once Beeper is set to ON, the voice will
come when starting and press the key.
2) Language:
Configure the system language to your preference.
3) Unit system setting:
Set the measurement unit system.