User Manual

NexLink NL102PLUS User Manual
10
CAUTION:
Don’t connect or disconnect any test equipment with ignition on or
engine running.
4.2 HD DPF
The
HD DPF function perform the DPF reset or regeneration.
From
Main
Screen
(Figure 4.1), use the [
] / [ ] scroll button and [ ] / [ ] scroll button
to select vechile
make
and press the [
OK
] button to start.
4.3 HD Service
The
HD Service function perform the sensor reset or calibration.
From
Main
Screen
(Figure 4.1), use the [
] / [ ] scroll button and [ ] / [ ] scroll button
to select vechile
make
and press the [
OK
] button to start.
4.4 DTC Library
The
DTC Library
function is used to search for definitions of DTCs stored in
the DTC library and for code breaker information.
1. From
Main Screen
(Figure 4.1), use the [ ] / [ ] scroll button and [ ] /
[
] scroll button to select
DTC Libary
and press the [
OK
] button.
2. From
DTC Library
screen,use the [
] / [ ] button to move to the desired
character,use the [
] / [ ] button to change selected digit/character and
press the [
OK
] button to confirm.
3. View the DTC definition on screen. When DTC definition covers more than
one screen,use the LEFT/RIGHT button or UP/DOWN button to view additional
information on previous/next screens.
4.5 Setup
Select [Tool Setup] in the main menu and press [
OK
], the system will enter the
system setup screen:
1) Beeper:
Turn ON/OFF the Beeper. Once Beeper is set to ON, the voice will
come when starting and press the key.
2) Language:
Configure the system language to your preference.