User Manual

NexLink NL102PLUS User Manual
18
depending on vehicle.
5.2.6 O2 sensor test
The results of O2 sensor test are not live values but instead the results of the
ECU’s last O2 sensor test. For live O2 sensor readings, refer to any of the live
sensor screens such as Graph Screen.
Not all test values are applicable to all vehicles. Therefore, the list generated
will vary depending on vehicle. In addition, not all vehicles support the Oxygen
Sensors screen.
5.2.7 On-board monitor test
This function can be utilized to read the results of on-board diagnostic
monitoring tests for specific components/systems.
5.2.8 Evap System
The EVAP test function lets you initiate a leak test for the vehicle’s EVAP
system. NL102P does not perform the leak test, but signals to vehicle’s
on-board computer to initiate the test. Before using the system test function,
refer to the vehicle’s service repair manual to determine the procedures
necessary to stop the test.
5.2.9 Vehicle Infomation
This option allows you to view the relevant information of the vehicle, including
VIN (Vehicle identification Number), CID (Calibration ID) and CVN (Calibration
verification number).
6. HD DPF
Regeneration is the process of removing the accumulated soot from the filter.
This is done either passively (from the engine’s exhaust heat in normal
operation or by adding a catalyst to the filter) or actively introducing very high
heat into the exhaust system.