User's Manual

User’s Manual
Light Industrial AP ENGLISH
59
Copyright © NEXCOM, INC.
7.2.5 Repeater
NEXCOM Access Points are capable of utilizing WDS to extend wireless network coverage.
If WDS is enabled, the AP can support up to 4 WDS links to its peer APs. Security Type (None, WEP,
or WPA/PSK) can be configured to decide which encryption is to be used for WDS connections
respectively. Please fill in remote peer’s MAC address and click SAVE to proceed; if setting revision is
necessary, the CLEAR button can be used to clear the contents in the above WDS connection list.
Repeater Settings: WDS
o WDS: Select Enable to enable the respective WDS links; Select Disable to remove them.
o MAC Address: To input remote peer’s MAC address.
o Security Type: None, WEP, or WPA-PSK.
o CAPWAP Tunnel Interface: Select Checkbox to designate WDS traffic to pass through
CAPWAP Tunnel established between the AP and the controller.