Ice Machine USER MANUAL Model 243031 Ice Machine, Air Cooled, 350 Lb. Production/24 Hrs. With Bin Model 243032 Ice Machine, Air Cooled, 500 Lb. Production/24 Hrs. With Bin Read this manual thoroughly prior to installation and operation. Keep these instructions in a safe location for future reference. For questions, contact NEXEL® Customer Service at 1-800-245-6682 or visit www.nexelwire.
Safety Information WARNING: Pay careful attention to the following warning labels on the ice maker. FIRE HAZARD: HAZARDOUS VOLTAGE: The label indicates a flammable foaming agent “Cyclopentane” used. There is a risk of fire. FIRE HAZARD: The label indicates a hazardous voltage. There is a risk of electric shock. HAZARDOUS VOLTAGE: The label indicates a flammable refrigerant “R290” used. There is a risk of fire. The label indicates a hazardous voltage. There is a risk of electric shock.
Safety Information (continued) DO NOT use this product in outdoor environments. DO NOT allow children, or those with physical or mental imparities play or operate this machine. ✦ The installation, repair or maintenance of this ice machine must be carried out by professional and qualified personnel, or electric shock, fire, personal injury may cause from incorrect operation.
WARNING: This ice maker contains a flammable refrigerant R290/R404a: • • • DANGER – RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIGERANT USED. DO NOT USE MECHANICAL DEVICES TO DEFROST REFRIGERATOR. DO NOT PUNCTURE REFRIGERANT TUBING. DANGER – RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIGERANT USED. TO BE REPAIRED ONLY BY TRAINED SERVICE PERSONNEL. DO NOT PUNCTURE REFRIGERANT TUBING. REPAIR MANUAL/OWNER'S GUIDE BEFORE ATTEMPTING TO SERVICE THIS PRODUCT. ALL SAFETY PRECAUTIONS MUST BE FOLLOWED.
Specifications: Model 243031 243032 Voltage: Power: Bin Capacity: Output: Refrigerant: Cooling: Material: Certification: Dimensions: Weight: Warranty: 115/60 (V/Hz) 790 W 275 lbs. 350 lbs/24 hr. R290 Air Cooled Food Grade PE + SUS304 Stainless Steel DOE, Energy Star, ETL/cETL, ETL Sanitation 23-7/8"W x 33-3/4"D x 67-3/8"H 187.4 lbs. 1 Year 115/60 (V/Hz) 1113 W 375 lbs. 500 lbs/24 hr.
Installation Steps 1. Upon delivery, check if the ice machine and all accessories are in good condition; check the machine model and the machine nameplate. 2. Clean the ice bin and all areas inside with a sponge soaked in warm water. Then wash and dry it with potable water. 3. Place the ice machine in the operation area; ensure that the machine is placed on a leveled floor. So as to ensure the water flows evenly on the evaporator. 4. For this air cooled unit, good ventilation is required.
Startup and Operation 1. Before you start up the machine, check and confirm: • • • • • • That the packaging tape inside the ice machine has been removed; All accessories and items in the ice bin have removed; The ice machine has been adjusted to a leveled state; The water pipe has been connected and the water valve is open; The plug has been connected to the power supply and the power switch is off; The ambient temperature, water temperature, and pressure of the water supply meet the above requirements.
Instruction of Control Panel 1. LED Display: • Self-Check: Will display “INI” code. • Preparing: Counts the number of seconds the machine takes to prepare. • Ice Making: Counts the number of seconds the machine takes until the water temperature decreases to 32ºF (0ºC). • • Ice Harvest: Counts the number of seconds the machine is in ice harvest mode. Clean: Displays “CLE” during cleaning mode; Displays “STL” during sterilizing mode; Displays “RIN” during rinsing mode. 2.
Fault Codes: Code Comments E01 Water Curtain or Ice Full Switch Fault E03 Ice Harvest Overtime Sleeping mode E04 High Temp. Fault Sleeping mode Water Shortage Fault Over-Pressure Fault Sleeping mode E07 Cond. Temp. Sensor Open Circuit Fault Keep working E08 Cond. Temp. Sensor Short Circuit Fault Keep working E09 Water Temp. Sensor Open Circuit Fault Keep working E10 Water Temp.
Water pipe In order to ensure food safety, the water pipe of the ice machine should be cleaned regularly. Wintering WARNING: Use caution while cleaning the condenser as the edges of the fins are sharp. Turn off the water and power supply, drain the residual water from the water trough, inlet pipe and drain pipe. The maintenance of the ice machine is not covered by the manufacturer's warranty! Clean Function NOTE: Clean and sterilize the bin and rinse completely.
or “OFF”, check whether the plug and socket are connected properly, and whether the power supply switch is ON. 3. Check nameplate and series number ✔ Check the nameplate located on the side or back of the ice machine and record the model and series number of the ice machine. NOTE: If the machine fails due to the user’s faults, such as no water supply, electricity or environmental factors, rather than the fault of the ice maker, warranty will be voided.
