User Manual

WARNING: This ice maker
contains a flammable refrigerant
R290/R404a:
• DANGER – RISK OF FIRE OR
EXPLOSION. FLAMMABLE
REFRIGERANT USED. DO NOT USE
MECHANICAL DEVICES TO DEFROST
REFRIGERATOR. DO NOT PUNCTURE
REFRIGERANT TUBING.
• DANGER – RISK OF FIRE OR
EXPLOSION. FLAMMABLE
REFRIGERANT USED. TO BE
REPAIRED ONLY BY TRAINED
SERVICE PERSONNEL. DO NOT
PUNCTURE REFRIGERANT TUBING.
• CAUTION – RISK OF FIRE OR
EXPLOSION FLAMMABLE
REFRIGERANT USED. CONSULT
REPAIR MANUAL/OWNER'S GUIDE
BEFORE ATTEMPTING TO SERVICE
THIS PRODUCT. ALL SAFETY
PRECAUTIONS MUST BE FOLLOWED.
• CAUTION – RISK OF FIRE OR
EXPLOSION. DISPOSE OF PROPERLY
IN ACCORDANCE WITH FEDERAL OR
LOCAL REGULATIONS. FLAMMABLE
REFRIGERANT USED.
• CAUTION – RISK OF FIRE OR
EXPLOSION DUE TO PUNCTURE OF
REFRIGERANT TUBING; FOLLOW
HANDLING INSTRUCTIONS
CAREFULLY. FLAMMABLE
REFRIGERANT USED.
General
The ice machine is fully automatic. With
proper installation and connection to potable
water and power source, the ice making
process will automatically operate. When the
bin is completely filled with ice, the machine
will automatically stop.
Installation
Location for Installation
The ice machine must be installed in a proper
location meeting the following conditions:
• Indoor, not more than 6,500 ft. above sea
level;
• Ambient temperature: 41-104°F (5-40°C);
• Power supply: the rated voltage indicated
on the machine nameplate ±6%;
• Water source: potable water, with water
pressure from 1.3 Bar to 5.5 Bar; water
temperature: 41-95°F (5-35°C);
• Keep ice machine away from heat
sources. DO NOT use in extreme high or
low temperature environments. Avoid
direct sunlight.
• Leave sufficient ventilation space around
the ice machine and keep good
ventilation. The distance from the ice
maker to the wall must be no less than
12” from the front, 8” from the rear, and
6” from each side.
• The ice machine must be placed on a
floor sufficient to support its weight;
• Socket for the ice maker must be reliably
grounded and with leakage protection;
• Proper floor drainage must be provided
near the installation location of the ice
machine.