Assembly instructions Instructions d’assemblage We’re here to help - Do not return this product ! . . . 1 877 629-9022 CANADA / USA Monday to Friday 7 AM - 3 PM - Eastern Time If you need help with assembly Lundi au vendredi 7h à 15h - Heure normale de l’Est If you received a damaged or defective part If you are missing hardware We will process replacement parts in 3-5 business days or less. Parts are shipped via FedEx Ground or mail. Email / Courriel service@nexeradistribution.
Read these assembly instructions carefully before beginning. Verify that you have in hands all the wood parts and hardware. Keep this document for future reference. Lisez attentivement ce guide d’assemblage avant de débuter. Assurez vous que toutes les composantes de bois et de quincaillerie sont présentes. Conservez ce document. Two people are required to assemble and move this unit. Deux personnes sont requises pour assembler et déplacer ce meuble.
Hardware List Liste de Quincaillerie 12x 18x 8x # 0203 # 0110 # 0111 20x 18x # 2200 # 0105 # 0202 10x 8x 1x # 0207 # 0104 # 2300 1x 2x 2x # 2141 # 2159 # 0123 4x 4x 8x # 2150 # 1111 # 0204 3x DR 2x # 0909 22x short court For drawers Pour tiroirs Discard the 6 black screws Jetez les 6 vis noires # 2148 CL Black Noir DL CR sets of 4 ensembles de 4 1x set of 2 ensemble de 2 # 0917 3
1a Remove inner part of the slide # 0917 by pulling down the small black arm as shown on the drawing. This part of the slide will be installed later on the drawer box Retirez la partie intérieure de la coulisse # 0917 en abaissant le levier noir tel que montré sur le schéma.
2 Install the 12 cam locks # 0203 into the panels A2, B2 and E Installez les 12 excentriques # 0203 dans les panneaux A2, B2 et E VIDEO Pressez fermement dans la cavité 12x # 0203 B2 E A2 E 3 Install 12 push bolt # 2200 into the panels A2, B2 and C1. Insert 2 wood dowels # 0207 into the panel C1 Installez 12 boulons # 2200 dans les panneaux A2, B2 et C1.
4 Fasten the 2 panels E to the panels A2 and B2. Then, tighten the 8 cam locks # 0203 located on both panels E Assemblez les 2 panneaux E avec les panneaux A2 et B2. Serrez ensuite les 8 excentriques # 0203 se trouvant sur les 2 panneaux E 8x 2 B2 A2 E IMPORTANT Turn clockwise 2/3 of a turn E 5 Tournez vers la droite 2/3 de tour et serrez fermement Fasten the panel C1 to the assembled unit.
6 Use a hammer to secure the 4 insert nuts # 2150 to the panels A2 and B2. Then, screw-in the 4 adjustable levellers # 1111 Utilisez un marteau pour installer les 4 insertions # 2150 dans les panneaux A2 et B2.
File drawer assembly - Assemblage du tiroir filière YB WB1 XB3 VA1 8 s extrémité des panneaux 2x # 2159 WB1 Align Alignez VA1 8
Install 4 small cam locks # 0204 into the panels VA1 and WB1. Refer to the small bag marked # 0204. Install 4 push bolts # 2200 into the panel XB3 Installez 4 mini excentriques # 0204 dans les panneaux VA1 et WB1. Référez-vous au petit sac marqué # 0204. Installez 4 boulons # 2200 dans le panneau XB3 4x # 0204 For drawers only Pour tiroirs seulement 4x VIDEO # 2200 # 2200 XB3 # 0204 VA1 WB1 10 Fasten the panels VA1 and WB1 to the drawer front XB3.
11 Insert the drawer bottom into the grooves located on panels VA1 and WB1. Then, fasten the panel YB to panels VA1 and WB1. Use Allen key # 2300 to tighten the 4 screws # 0111 Insérez le fond de tiroir dans les 2 rainures des panneaux VA1 et WB1. Assemblez ensuite le panneau YB avec les panneaux VA1 et WB1.
13 Fasten the 2 drawer slides # 0917 to the panels VA1 and WB1. Use 3 screws # 0104 per slide. Align each slide with the holes located on panels VA1 and WB1 Installez les 2 coulisses de tiroir # 0917 sur les panneaux VA1 et WB1. Utilisez 3 vis # 0104 par coulisse.
15 3 the Assemblez les panneaux V et W à la façade XA3 et serrez fermement les 2 excentriques # 0204 2x IMPORTANT W Turn clockwise 2/3 of a turn Tournez vers la droite 2/3 de tour et serrez fermement V XA3 16 Insert the drawer bottom into the grooves located on panels V and W Insérez le fond de tiroir dans les 2 rainures des panneaux V et W drawer bottom fond de tiroir V W Drawer bottom must enter into the groove located on panel XA3 Le fond de tiroir doit entrer dans la rainure se trouvant sur
17 Fasten the panel Y to both panels V and W. Align the 2 wood dowels # 0207 with the holes close to the grooves. Use the Allen key # 2300 to tighten the 2 screws # 0111 Assemblez le panneau Y avec les panneaux V et W en prenant soin d’insérer les 2 goujons # 0207 dans les trous près des rainures.
19 Use the 6 screws # 0105 to fasten the 3 handles # 2148 to the drawer front XB3 and both drawer fronts XA3. Refer to the small pilot holes drilled at the back of each drawer front to locate the handle. Handles ca be mounted on right or left side of unit Utilisez 6 vis # 0105 pour installer les 3 poignées # 2148 sur la façade de tiroir XB3 et les 2 façades XA3. Référez vous aux trous pilotes à l’arrière de chaque façade pour positionner chaque poignée # 2148.
Assembly instructions Instructions d’assemblage We’re here to help - Do not return this product ! . . . 1 877 629-9022 CANADA / USA Monday to Friday 7 AM - 3 PM - Eastern Time If you need help with assembly Lundi au vendredi 7h à 15h - Heure normale de l’Est If you received a damaged or defective part If you are missing hardware We will process replacement parts in 3-5 business days or less. Parts are shipped via FedEx Ground or mail. Email / Courriel service@nexeradistribution.
Hardware List 10x Liste de quincaillerie 2x 2x # 1111 # 0207 2x 1x # 2200 # 2150 # 0603 2x 4x # 0120 # 2173 # 0203 10x p.
2 Install the 10 push bolts # 2200 into the panel A1, B1 and C1. Then, insert 2 wood dowels # 0207 into the panel C1 Installez les 10 boulons # 2200 dans les panneaux A1, B1 et C1. Insérez ensuite 2 goujons de bois # 0207 dans le panneau C1 VIDEO 2x # 0207 10x # 2200 A1 B1 C1 3 Fasten the panels A1 and B1 to the panel E1. Then, tighten the 4 cam locks # 0203 located on panel E1 Assemblez les panneaux A1 et B1 avec le panneau E1.
4 Fasten the panel C1 to the assembled unit. Then, tighten the 6 cam locks # 0203 located on panels A1, B1 and E1 Assemblez le panneau C1 à l’unité déjà assemblée. Serrez ensuite les 6 excentriques # 0203 se trouvant sur les panneaux A1, B1 et E1 6x B1 C1 E1 A1 IMPORTANT Turn clockwise 2/3 of a turn Tournez vers la droite 2/3 de tour et serrez fermement 5 Use a hammer to install the 2 insert nuts # 2150 into the panel B1.
1 Install the 10 cam locks # 0203 into the panels A1, B1 and E1 Installez les 10 excentriques # 0203 dans les panneaux A1, B1 et E1 VIDEO Pressez fermement dans la cavité 10x # 0203 A1 B1 E1 Add a protection under the parts on all assembly steps Ajoutez une protection sous les pièces à chaque étape 2 Install the 10 push bolts # 2200 into the panel A1, B1 and C1. Then, insert 2 wood dowels # 0207 into the panel C1 Installez les 10 boulons # 2200 dans les panneaux A1, b1 et C1.
3 Fasten the panels A1 and B1 to the panel E1. Then, tighten the 4 cam locks # 0203 located on panel E1 Assemblez les panneaux A1 et B1 avec le panneau E1. Serrez ensuite les 4 excentriques # 0203 se trouvant sur le panneau E1 4x B1 E1 IMPORTANT A1 Turn clockwise 2/3 of a turn Tournez vers la droite 2/3 de tour et serrez fermement 4 Fasten the panel C1 to the assembled unit. Then, tighten the 6 cam locks # 0203 located on panels A1, B1 and E1 Assemblez le panneau C1 à l’unité déjà assemblée.
5 Use a hammer to install the 2 insert nuts # 2150 into the panel B1. Then, screw-in the 2 adjustable levellers # 1111 Utilisez un marteau pour installer les 2 insertions # 2150 dans le panneau B1.
6 Use the mounting plate # 0603 and the 2 screw # 0120 to secure your new desk 211306 to the drawer unit 211203 or 211206. Add 4 caps # 2173 on the 4 visible holes 6 au meuble tiroir 211203 ou 211206.
Assembly instructions Instructions d’assemblage We’re here to help - Do not return this product ! . . . 1 877 629-9022 CANADA / USA Monday to Friday 7 AM - 3 PM - Eastern Time If you need help with assembly Lundi au vendredi 7h à 15h - Heure normale de l’Est If you received a damaged or defective part If you are missing hardware We will process replacement parts in 3-5 business days or less. Parts are shipped via FedEx Ground or mail. Email / Courriel service@nexeradistribution.
Liste de quincaillerie Hardware List 4x 1x 6x # 2126 # 2300 # 0111 4x 4x 8x # 0108 # 0105 # 2207 For drywall only Pour gypse seulement 2 units to be assembled 2 unités à assembler 1 Use 4 screws # 0105 to fasten 2 keyhole plates # 2126 to the rear face of panel E. Refer to the pre-drilled holes to locate the plates Utilisez 4 vis # 0105 pour fixer 2 plaques de montage # 2126 sur la face arrière du panneau E.
2 Use the Allen key # 2300 and 3 screws # 0111 to fasten the panel F to the panel E Utilisez la clé Allen # 2300 et 3 vis # 0111 pour assembler le panneau F au panneau E F 3 3x # 0111 E # 2300 Use panel G as a template guide to set the location of each shelf on the wall. Use a sharpened pencil and a level to mark the location of the 2 wall anchors Utilisez la pièce G comme guide pour positionner chaque tablette sur le mur.
Wall anchors # 2207 are designed to be used only with drywall Les ancrages muraux # 2207 sont conçus uniquement pour les murs de gypse 4 Use a hammer to knock in the 2 wall anchors # 2207 into the wall. Then, insert 1 screw # 0108 in each anchor. Leave 1/8" (3mm) between the head of the screw and the wall to allow the unit to hang properly. Align the keyhole # 2126 located at the back of the unit with the 2 anchors on the wall Utilisez un marteau pour installer les 2 ancrages muraux # 2207 dans le mur.
Limited 1 Year Warranty All Nexera products are warranted to the original purchaser against defects in material or workmanship for a period of 1 year from the date of purchase. “Defects” as used in this warranty is defined as any imperfections that may impair the use of the furniture or product for which it was intended to. This warranty is expressly limited to the replacement of defective furniture parts and/or components, subject to availability of stock. Assembly labor is excluded.