User Manual

Remove the battery cover, insert the rechargeable lithium
battery, and replace the battery cover. Connect the adapter,
mobile power or PC and terminal using a USB line. Plug the
adapter into a power outlet. Power on the terminal. The
terminal screen will display charging progress. After the
terminal is fully charged “ ” will display as shown in the pic
below.
power ba nk
Type- C
1.Open the paper cabinet cover in the direction shown below.
2.Open the paper-roll and insert it into paper holder in the
direction shown above, leaving a small portion of paper
below the paper cutter.
3.Close the paper holder cover in the direction shown below.
Note: Make sure the paper-roll installed in the right direction
or it will result in malfunction of the printer.