SDS

_____________________________________________________________________________________________
1199222 - Omnergy CR Type Lithium Coin Cell Revision Date 10-Apr-2017
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Limits
.
Chemical name ACGIH TLV OSHA PEL NIOSH IDLH
Supplier Trade Secret TWA: 0.02 mg/m
3
Mn respirable
particulate matter
TWA: 0.1 mg/m
3
Mn inhalable
particulate matter
(vacated) Ceiling: 5 mg/m
3
Ceiling: 5 mg/m
3
Mn
IDLH: 500 mg/m
3
Mn
TWA: 1 mg/m
3
Mn
STEL: 3 mg/m
3
Mn
Supplier Trade Secret TWA: 2 mg/m
3
respirable
particulate matter all forms
except graphite fibers
TWA: 15 mg/m
3
total dust
synthetic
TWA: 5 mg/m
3
respirable
fraction synthetic
(vacated) TWA: 2.5 mg/m
3
respirable dust natural
(vacated) TWA: 10 mg/m
3
total
dust synthetic
(vacated) TWA: 5 mg/m
3
respirable fraction synthetic
TWA: 15 mppcf natural
IDLH: 1250 mg/m
3
TWA: 2.5 mg/m
3
respirable
dust
Chemical name Alberta British Columbia Ontario TWAEV Quebec
Supplier Trade Secret TWA: 0.2 mg/m
3
TWA: 0.2 mg/m
3
TWA: 0.02 mg/m
3
TWA: 0.1 mg/m
3
TWA: 0.2 mg/m
3
Supplier Trade Secret TWA: 5 ppm
TWA: 18 mg/m
3
Skin
Supplier Trade Secret TWA: 2 mg/m
3
TWA: 2 mg/m
3
TWA: 2 mg/m
3
TWA: 2 mg/m
3
Other Exposure Guidelines
Vacated limits revoked by the Court of Appeals decision in AFL-CIO v. OSHA, 965 F.2d 962
(11th Cir., 1992). See section 15 for national exposure control parameters.
Appropriate engineering controls
Engineering controls
Showers
Eyewash stations
Ventilation systems.
Individual protection measures, such as personal protective equipment
Eye/face protection
If splashes are likely to occur, wear safety glasses with side-shields.
Hand protection
Wear suitable gloves. Impervious gloves.
Skin and body protection
Wear suitable protective clothing. Long sleeved clothing.
Respiratory protection
No protective equipment is needed under normal use conditions. If exposure limits are
exceeded or irritation is experienced, ventilation and evacuation may be required.
General hygiene considerations
Handle in accordance with good industrial hygiene and safety practice. Do not eat, drink or
smoke when using this product. Wash hands before breaks and immediately after handling
the product. Wear suitable gloves and eye/face protection. Avoid contact with skin, eyes or
clothing. Avoid breathing dust/fume/gas/mist/vapors/spray.
9. PHYSICAL AND CHEMICAL PROPERTIES
_____________________________________________________________________________________________
Page 5 / 11