User's Manual

Wooden Bluetooth Speaker
Instruction Manual
MINI CUBE
Read this instruction manual before operating
the appliance; and save it for further reference.
Congratulations on your purchase of this Bluetooth speaker for your iPod/
iPhone/iPad or mobile phone. You can enjoy audio from the compatible
Bluetooth device or other audio devices. To get the most from your speaker
system, please take a few minutes to read these instructions.
Safety instruction
* Heed all warnings.
* Follow all instructions.
* Do not use this device near water; clean only using a dry or slightly
moist cloth.
* The appliance shall not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed near the product.
Do not place speaker on any wet surface.
* D o not allow children to play with the product.
* Do not cover the unit with any table-cloths, curtains, etc. Place the unit
where there is good air circulation.
* No naked flames sources, such as candles, should be placed on the
product.
* Press the player's buttons gently. Pressing them too hard can damage
the player.
* Do not use the player in an extremely dry environment, as this can lead
to static discharge which can damage the player.
* Do not expose product to temperatures above 35C; keep it out of direct
sunlight.
* This product has no user-serviceable parts. Do not attempt to repair this
product yourself. Only qualified service personnel should perform servicing.
* Care required with the use of this apparatus in tropical and/or moderate
climates.
* Do not subject the product to harsh impacts. Do not drop the appliance.
This may result in damage to the product.
* Use a slightly damp, lint-free cloth to clean this appliance.
* This product is not intended for commercial use. This product is intended
for indoor. Do not mount this product on a wall or ceiling.
* Do not place unit near TV, speakers, wireless telephones and other
objects that generate strong magnetic fields.
* When the unit is affected by a strong electromagnet field or by other
interference simply turn off to reset the speakers, it will return to normal
operation.
* The batteries of the speakers are not user-replaceable. If battery failure
occurs shortly after they have been fully charged, please take it to your
local service center for replacement by a qualified service technician.
* Do not use this product inside hospital or next to any medical instrument.
* Only use attachments/accessories specified by the manufacturer.
The standard accessories
Unpack the unit carefully. We recommend that you save the box and packing
materials, in case you wish to store the unit.
Before setting up the unit, verify that the following accessories are present:
2/ USB~Line-in Cable 3/ Instruction Manual1/ Speaker Unit
Technical Specifications
Model No. : MINI CUBE
DC power input : DC 5V 1A
Speaker size : Dia 40mm
Bluetooth A2DP function
Silicone finish
Built-in 600mAh Li-ion rechargeable battery
Battery life : 5Hrs ( Volume at 50% )
Mini USB jack, power by USB cable ( USB cable included )
3.5mm Aux jack for connection to other MP3, CD, Laptop
Audio Output Power : 3W
Working Distance in open air : < 10M
NOTE : As a result of continual improvements, the design and
specifications of the product within may differ slightly to the unit
illustrated on the packaging.
Charging LED Indicator
LED in red light Charging status
LED in off mode Charging is finished
Blue LED Status Indicator
Paired Blue light stops flash
Aux-in mode Blue light flash quickly
Power on Light up ( Blue )
Power off Light switches off
How to charge the speaker
Your speaker has an built in rechargeable battery, before the first use, the
battery should be charged to ensure optimal performance and battery life,
charging the speaker for about six hours after connecting the speaker to the
USB port of a PC which is powered on. Alternately the speaker may be
powered by a 110V/60Hz wall charger (sold separately) with a 5V 1Amp USB
output.
The red charging indicator will be “on” while it is charging; the red light switches
off once battery is full charged.
The repeat charging time needs about 4-5 hours; the playback time has about
2-3hours, it depends on the volume level as you desired.
Set up
1. Slide the power switch to “On” to turn on the speaker. The blue LED
indicator will be flashing shows Bluetooth pairing.
2. The Speaker starts searching for Bluetooth device.
3. Turn on your Bluetooth device (iPod/iPhone, mobile phone or compatible
device). Refer to the device user manual to activate the Bluetooth function
and pair with the Bluetooth device.
4. For Apple iPhone select Settings, General, Bluetooth and wait for the
iPhone to search for the device
5. Select the “MINI CUBE” device from the Bluetooth list, Tap the “Not paired”
to pair the device.
6. Once paired the LED indicator will stop the flash.
7. When paired successfully both the speaker and your Bluetooth device will
store the device. Now you can play music from your iPod/iPhone or mobile
phone through the Bluetooth speaker. When you use the same Bluetooth
device to connect to the speaker there is no need to use the password.
8. When it is not being used for a long period time, please turn off the speaker.
Listening to Bluetooth device
You can listen to a Bluetooth device through this speaker.
Note: the effective operation range between the speaker and your Bluetooth
device is approximately 10 meters in open air.
1. Switch on to turn on Bluetooth function. Activate the Bluetooth function in
your Bluetooth device. Play music from your Bluetooth device and enjoy it
on your Bluetooth speaker.
2. To adjust speaker volume by touching the button on the Bluetooth Speaker.
3. To Pause and resume play of the music track, touch the Play/Pause on the
Bluetooth Speaker.
Remark:
1. If the device has already been paired to the speaker before, then just select
MINI CUBE and it will pair again.
2. Please do not play music via AUX in function while charging in process.
Play from an external device
If the music player does not supply the Bluetooth function, you can also listen
to an external audio device through this speaker. The supplied audio cable
has 3.5mm plug.
1. First connect the 3.5mm audio plug to the 3.5mm AUDIO output or
earphone jack on an MP3 player, plug the Micro USB plug to the
AUX/DC in jack on your speaker.
2. Speaker will switch to Line In mode automatically.
3. If you want to adjust the volume level of your speaker, only adjust the
volume control on the connected MP3 player.
4. If you want to Play/pause the music play, just control the native buttons
on your MP3 player.
Care and maintenance Instructions:
When cleaning the unit, you should first unplug it from the power supply. Use
only a dry soft cloth to wipe the unit. Never allow water or any other liquids to
get inside the unit while cleaning. Do not use any cleaning agents containing
alcohol, ammonia, benzene, or abrasives as this may harm the set.
Unplug the unit if you are not using it for an extended period of time. This
product is not intended for commercial use. Household use only.
Symptom Possible problem and solution
Cannot pair
successfully
Check whether the speaker is in power on and
searching mode.
Check whether there are too many Bluetooth
receivers around your Bluetooth device. Turn
them off to avoid any disturbance. And pair again.
The sound is small
or distorted
Check the volume setting on your Bluetooth device
and adjust the volume to a suitable level.
Cannot play properly,
the music is
intermittently
Check whether the distannce between the
speaker and your Bluetooth device is out of its
working distance 10m, or whether there are some
obstacles blocking the communication between
the speaker and the Bluetooth device. Move the
speaker or the Bluetooth again to get the best
position.
1 2
3
4
5
6
Wooden Bluetooth Speaker
Instruction Manual
KIKORI
Read this instruction manual before operating
the appliance; and save it for further reference.
CHARGING INDICATOR AUX IN / DC IN
POWER SWITCH BLUETOOTH INDICATOR
MINI CUBE
FCC ID : 2ACUH-MINICUBE
FCC ID : 2ACUH-MINICUBE
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2)this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation.If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or Modifications not expressly approved by the party responsible could void the user’s authority
to operate this device.