User's Manual

FCC ID : 2ACUH-TWINS
Congratulations on your purchase of this Bluetooth speaker for your iPod/
iPhone/iPad or mobile phone. You can enjoy audio from the compatible
Bluetooth device or other audio devices. To get the most from your speaker
system, please take a few minutes to read these instructions.
Safety instruction
* Heed all warnings.
* Follow all instructions.
* Do not use this device near water; clean only using a dry or slightly
moist cloth.
* The appliance shall not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed near the product.
* Do not place speaker on any wet surface.
* D o not allow children to play with the product.
* Do not cover the unit with any table-cloths, curtains, etc. Place the unit
where there is good air circulation.
* No naked flames sources, such as candles, should be placed on the
product.
* Press the player's buttons gently. Pressing them too hard can damage
the player.
* Do not use the player in an extremely dry environment, as this can lead
to static discharge which can damage the player.
* Do not expose product to temperatures above 35C; keep it out of direct
sunlight.
* This product has no user-serviceable parts. Do not attempt to repair this
product yourself. Only qualified service personnel should perform servicing.
* Care required with the use of this apparatus in tropical and/or moderate
climates.
* Do not subject the product to harsh impacts. Do not drop the appliance.
This may result in damage to the product.
* Use a slightly damp, lint-free cloth to clean this appliance.
* This product is not intended for commercial use. This product is intended
for indoor. Do not mount this product on a wall or ceiling.
* Do not place unit near TV, speakers, wireless telephones and other
objects that generate strong magnetic fields.
* When the unit is affected by a strong electromagnet field or by other
interference simply turn off to reset the speakers, it will return to normal
operation.
* Do not use this product inside hospital or next to any medical instrument.
* Only use attachments/accessories specified by the manufacturer.
The standard accessories
Unpack the unit carefully. We recommend that you save the box and packing
materials, in case you wish to store the unit.
Before setting up the unit, verify that the following accessories are present:
2/ Power Adaptor x 2 3/ Instruction Manual1/ Speaker Unit x 2
8. When paired successfully the speaker and your Bluetooth device will store
the device. Now you can play music from your iPod/iPhone or mobile
phone through the Bluetooth speaker.
9. To adjust speaker volume by adjusting the volume on the Bluetooth Device.
10. To Pause and resume play of the music track by pressing the button on the
Bluetooth Speaker.
11. When it is not being used for a long period time, please turn off the speaker.
4
Technical Specifications
Model : TWINS
DC power input : DC 9V 1A X 2
Speaker size : Dia 3" each speaker X 2
Bluetooth A2DP function
3.5mm Aux jack for connection to other MP3, CD, Laptop
Audio Output Power : 8W X 2
Working Distance in open air : < 30'
NOTE : As a result of continual improvements, the design and
specifications of the product within may differ slightly to the unit
illustrated on the packaging.
Symptom Possible problem and solution
Cannot pair
successfully
Check whether the speaker is in power on and
searching mode.
Check whether there are too many Bluetooth
receivers around your Bluetooth device. Turn
them off to avoid any disturbance. And pair again.
The sound is small
or distorted
Check the volume setting on your Bluetooth device
and adjust the volume to a suitable level.
Cannot play properly,
the music is
intermittently
Check whether the distannce between the
speaker and your Bluetooth device is out of its
working distance 10m, or whether there are some
obstacles blocking the communication between
the speaker and the Bluetooth device. Move the
speaker or the Bluetooth again to get the best
position.
5
6
Trouble Shooting
No sound from the
speaker when playing
music via bluetooth
Check the bluetooth is connected and the volume
setting on your Bluetooth device.
Check the AUX-IN cable is unpluged.
Play from an external device
If the music player does not supply the Bluetooth function, you can also listen
to an external audio device through this speaker using audio 3.5mm
cable ( not included ).
1. First connect the 3.5mm audio plug to the 3.5mm AUDIO output or
earphone jack on an MP3 player, plug another 3.5mm jack to the
AUX IN socket on your speaker.
2. Speaker will switch to Line In mode automatically.
3. If you want to adjust the volume level of your speaker, only adjust the
volume control on the connected MP3 player.
4. If you want to Play/pause the music play, just control the native buttons
on your MP3 player.
Note: In power on mode, the AUX in function is effective if the AUX in cable
is connected although the Bluetooth indicator lights continually; the
Buletooth function is effective if the AUX in cable is disconnected.
True Wireless Wooden Bluetooth Speaker
Instruction Manual
Read this instruction manual before operating
the appliance; and save it for further reference.
TWINS
Instruction Manual
Read this instruction manual before operating
the appliance; and save it for further reference.
Features
TWINS
1 2
3
Single Speaker Operation Set Up
1. Connect a speakers the DC IN socket with the Power Adaptor provided.
2. Press and hold the power switch to turn on the speaker. The blue LED
indicator will be flashing shows Bluetooth pairing.
3. The Speaker starts searching for Bluetooth device.
4. Turn on your Bluetooth device (iPod/iPhone, mobile phone or compatible
device). Refer to the device user manual to activate the Bluetooth function
and pair with the Bluetooth device.
Care and maintenance Instructions:
When cleaning the unit, you should first unplug it from the power supply. Use
only a dry soft cloth to wipe the unit. Never allow water or any other liquids to
get inside the unit while cleaning. Do not use any cleaning agents containing
alcohol, ammonia, benzene, or abrasives as this may harm the set.
Unplug the unit if you are not using it for an extended period of time. This
product is not intended for commercial use. Household use only.
Wooden Bluetooth Speaker
MASS
BT indicator
Power ON/OFF
Play / Pause
L/R BT PAIR
Stereo Speaker Operation Set Up
1. First to turn on the LEFT speaker .
2. Activate the Bluetooth function in your Bluetooth device and connect to
LEFT Bluetooth speaker. The blue LED will be on.
3. Turn on the RIGHT speaker.
4. Long press BOTH speakers ‘ L/R BT pairing ‘ buttons on the back at the
same time to enter internal pairing mode.
5. At this time, LEFT speaker will stop pairing to your bluetooth device.
6. Wait for a while until two speakers paired together, the LEFT speaker
will pair to Bluetooth device again.
7. Now you can enjoy true wireless stereo music.
8. You can control the music playback and pause by pressing the buttons on
both speakers.
Remark:
1. If the device has already been paired to the speaker before, then just select
MARK II and it will pair again. Please pair the LEFT speaker first then
turn on the RIGHT speaker. Both speakers will pair together. Don’t play
music until they are paired.
LEFT
RIGHT
L/R BT PAIR
Listening to Bluetooth device
You can listen to a Bluetooth device through one speaker or in pairs.
Note: the effective operation range between the speaker and your Bluetooth
device is approximately 10 meters in open air.
5. For Apple iPhone select Settings, General, Bluetooth and wait for the
iPhone to search for the device
6. Select the “TWINS” device from Bluetooth list, Tap the “Not Connected”
to pair the device.
7. Once paired the LED indicator will stop flashing.
FCC ID
: 2ACUH-TWINS
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2)this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation.If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or Modifications not expressly approved by the party responsible could void the user’s authority
to operate this device.