User's Guide

Adjust the projection image
When you use this product to cast the screen on the white wall, the
recommendations are as follows:
1. Choose environment
Choose a white wall with a large area or a professional anti-light screen to ensure the
overall clarity of the picture.
2. Place the product
Try to ensure that the cabinet, tabletop or floor where this product is placed are not
tilted or uneven, so as to ensure the best picture and protect the product from
damage.
3. Adjust the castors
As shown in the figure below, turn the height adjustment wheel on the side and indent
the foot pads on both sides of the front of this product to adjust to the lowest state.
4. Adjust the screen
Step 1: First adjust a regular rectangle that is smaller than the screen and parallel to all
four sides of the screen;