User's Manual

Page 64/82 TECHNICAL SPECIFICATIONS
9.4 PS Analogue TDcontrollers
9.4.1 Specifications
SPECIFICATIONS
Output Section
+22 /+16/+10 dBm typical into 600 load (+6/0/-6dB back panel switch).
Input Section Maximum input level : 22dBu. CMRR 80dB @ 1kHz typical.
THD+N 0.1% @ 1kHz Typ. for +10dBm output
Noisefloor PSTD -100 dBv for 0dB switch position (22 Hz - 22 kHz, unweighted)
Dynamic Range 111 dB unweighted (THD+N at-60dBr sine wave @1kHz relative to maximum output)
Crosstalk 104dB
Filtering & EQ. L&R: 12dB/oct Low Pass, 12dB/oct High pass (crossover or overlap), 4 Parameter EQs.
Factory defined
Protections VCA temp. (SUB,LF & LF), VCEQ disp. (SUB & LF), Peak Limiter (all chanels), Power
compression regulation
Power Supply 100-250 Volts (continuous operation), 50/60Hz. Power 9W. Peak inrush current 0.5A.
Earth-Lift.
Conformity Comply with safety objective of 73/23/EEC & 89/336/EEC directives. (EN60065-12/2001,
EN55103-1996).
CB scheme DK-8371, cULus 60065 AZSQ E241312, FCC part15 class B
PRODUCT FEATURES
Audio Inputs
Two XLR-3F connectors (differential non floating L&R audio inputs, 50 kΩ).
Sense Inputs 6 Pole Removable Strip Terminal (three amplifier sense inputs - Left, Right and Sub - 400
kΩ).
Audio Outputs Two XLR-3M connectors (balanced non floating L&R audio outputs, 51 Ohm)
One XLR-3M connector (balanced non floating Sub audio outputs, 51 Ohm)
Controls Gain switch (back panel), 3 positions : -6 / 0 /+6dB.
Peak Limiter trimmer for PS & Sub
Sub Overlap / Crossover switch & Sub Gain Control (-/+ 6dB).
Indicators LF speakers Protect Yellow LED's (Temp. & Disp), Power ON (green), Amp Sense &
Peak LED's (green/Red)
Dimensions 1U (19") Rack - 165mm (6.5") Depth
Weight : 2.9 kg (6.6 lbs) net
SYSTEM OPERATION
Applicable Products PSTDcontrollers are precisely matched to the PS & dedicated Subbass, and includes
sophisticated protection systems. Use of either product without properly connected
PSTDController will result in poor sound quality and may damage the components.
SubBass Active two-way operation of the PS Loudspeakers with dedicated Subbass is included in
Analogue PSTDcontrollers.
9.4.2 Front and Rear Panel view