Data Sheet

1. General description
The 74HC153; 74HCT153 is a dual 4-input multiplexer. The device features independent
enable inputs (nE
) and common data select inputs (S0 and S1). For each multiplexer, the
select inputs select one of the four binary inputs and routes it to the multiplexer output
(nY). A HIGH on E
forces the corresponding multiplexer outputs LOW. Inputs include
clamp diodes. This enables the use of current limiting resistors to interface inputs to
voltages in excess of V
CC
.
2. Features and benefits
 Input levels:
 For 74HC153: CMOS level
 For 74HCT153: TTL level
 Non-inverting outputs
 Separate enable input for each output
 Common select inputs
 Complies with JEDEC standard no. 7A
 Permits multiplexing from n lines to 1 line
 Enable line provided for cascading (n lines to 1 line)
 ESD protection:
 HBM JESD22-A114F exceeds 2000 V
 MM JESD22-A115-A exceeds 200 V
 Multiple package options
 Specified from 40 C to +85 C and 40 C to +125 C.
3. Ordering information
74HC153; 74HCT153
Dual 4-input multiplexer
Rev. 6 — 11 May 2016 Product data sheet
Table 1. Ordering information
Type number Package
Temperature range Name Description Version
74HC153D 40 C to +125 C SO16 plastic small outline package; 16 leads; body width
3.9 mm
SOT109-1
74HCT153D
74HC153DB 40 C to +125 C SSOP16 plastic shrink small outline package; 16 leads; body
width 5.3 mm
SOT338-1
74HCT153DB
74HC153PW 40 C to +125 C TSSOP16 plastic thin shrink small outline package; 16 leads;
body width 4.4 mm
SOT403-1
74HCT153PW