Data Sheet

ManualsBrandsNEXPERIA ManualsLogic ICsLogic IC - Inverter Inverter 4000B SO 14

1. General description

The HEF40106B provides six inverting buffers. Each input has a Schmitt trigger circuit.

The inverting buffer switches at different points for positive-going and negative-going

signals. The difference between the positive voltage (V

T+

) and the negative voltage (V

T

)

is defined as hysteresis voltage (V

The HEF40106B may be used for enhanced noise immunity or to “square up” slowly

changing waveforms.

It operates over a recommended V

power supply range of 3 V to 15 V referenced to V

(usually ground). Unused inputs must be connected to V

, V

, or another input.

2. Features and benefits

 Schmitt trigger input discrimination

 Fully static operation

 5 V, 10 V, and 15 V parametric ratings

 Standardized symmetrical output characteristics

 Specified from 40 C to +125 C

 Complies with JEDEC standard JESD 13-B

3. Applications

 Wave and pulse shapers

 Astable multivibrators

 Monostable multivibrators

4. Ordering information

HEF40106B

Hex inverting Schmitt trigger

Rev. 8 — 10 December 2015 Product data sheet

Table 1. Ordering information

All types operate from





C to +125



Type number Package

Name Description Version

HEF40106BT SO14 plastic small outline package; 14 leads; body width 3.9 mm SOT108-1

HEF40106BTT TSSOP14 plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1

Summary of content (15 pages)

PAGE 1
HEF40106B Hex inverting Schmitt trigger Rev. 8 — 10 December 2015 Product data sheet 1. General description The HEF40106B provides six inverting buffers. Each input has a Schmitt trigger circuit. The inverting buffer switches at different points for positive-going and negative-going signals. The difference between the positive voltage (VT+) and the negative voltage (VT) is defined as hysteresis voltage (VH).
PAGE 2
HEF40106B Nexperia Hex inverting Schmitt trigger 5. Functional diagram $ < $ < $ < $ < $ < $ < $ < PQD PQD Fig 1. Functional diagram Fig 2. Logic diagram (one inverting buffer) 6. Pinning information 6.1 Pinning +() % $ 9'' < $ $ < < $ $ < < $ 966 < DDO Fig 3.
PAGE 3
HEF40106B Nexperia Hex inverting Schmitt trigger 6.2 Pin description Table 2. Pin description Symbol Pin Description 1A to 6A 1, 3, 5, 9, 11, 13 input 1Y to 6Y 2, 4, 6, 8, 10, 12 output VDD 14 supply voltage VSS 7 ground (0 V) 7. Functional description Table 3. Function table[1] Input Output nA nY L H H L [1] H = HIGH voltage level; L = LOW voltage level. 8. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134).
PAGE 4
HEF40106B Nexperia Hex inverting Schmitt trigger 9. Recommended operating conditions Table 5. Recommended operating conditions Symbol Parameter VDD Conditions Min Max supply voltage 3 15 V VI input voltage 0 VDD V Tamb ambient temperature 40 +125 C in free air Unit 10. Static characteristics Table 6. Static characteristics VSS = 0 V; VI = VSS or VDD; unless otherwise specified.
PAGE 5
HEF40106B Nexperia Hex inverting Schmitt trigger 11. Dynamic characteristics Table 7. Dynamic characteristics Tamb = 25 C; CL = 50 pF; tr = tf  20 ns; wave forms see Figure 4; test circuit see Figure 5; unless otherwise specified. Symbol Parameter HIGH to LOW propagation delay tPHL tPLH tTHL [1] VDD Typ Max Unit 63 ns + (0.55 ns/pF)CL - 90 180 ns 10 V 29 ns + (0.23 ns/pF)CL - 35 70 ns 15 V 22 ns + (0.16 ns/pF)CL - 30 60 ns 58 ns + (0.
PAGE 6
HEF40106B Nexperia Hex inverting Schmitt trigger 12. Waveforms WU 9, WI LQSXW 90 9 W3+/ 92+ W3/+ 90 RXWSXW 92/ W7+/ W7/+ DDJ Measurement points are given in Table 9. Logic levels: VOL and VOH are typical output voltage levels that occur with the output load. tr, tf = input rise and fall times. Fig 4. Propagation delay and output transition time Table 9. Measurement points Supply voltage Input Output VDD VM VM 5 V to 15 V 0.5VDD 0.
PAGE 7
HEF40106B Nexperia Hex inverting Schmitt trigger 13. Transfer characteristics Table 11. Transfer characteristics VSS = 0 V; see Figure 6 and Figure 7. Symbol Parameter Conditions VDD Tamb = 40 C to +85 C Min positive-going threshold voltage VT+ negative-going threshold voltage VT hysteresis voltage VH [1] Typ[1] Tamb = 40 C to +125 C Unit Max Min Max 5V 2.0 3.0 3.5 2.0 3.5 V 10 V 3.7 5.8 7.0 3.7 7.0 V 15 V 4.9 8.3 11.0 4.9 11.0 V 5V 1.5 2.2 3.0 1.5 3.
PAGE 8
HEF40106B Nexperia Hex inverting Schmitt trigger DDO DDO ,' $ ,' $ 9, 9 9, 9 a. VDD = 5 V; Tamb = 25 C b. VDD = 10 V; Tamb = 25 C DDO ,' $ 9, 9 c. Fig 8.
PAGE 9
HEF40106B Nexperia Hex inverting Schmitt trigger DDO 9, 9 93 91 9'' 9 Tamb = 25 C. Fig 9. Typical switching levels as a function of supply voltage 14. Application information Some examples of applications for the HEF40106B are: • Wave and pulse shapers • Astable multivibrators • Monostable multivibrators 5 &3 5 & & PQD DDO Fig 10. Astable multivibrator Fig 11.
PAGE 10
HEF40106B Nexperia Hex inverting Schmitt trigger 15.
PAGE 11
HEF40106B Nexperia Hex inverting Schmitt trigger 76623 SODVWLF WKLQ VKULQN VPDOO RXWOLQH SDFNDJH OHDGV ERG\ ZLGWK PP ' 627 ( $ ; F \ + ( Y 0 $ = 4 $ SLQ LQGH[ $ $ $ ș / S / H GHWDLO ; Z 0 E S PP VFDOH ',0(16,216 PP DUH WKH RULJLQDO GLPHQVLRQV 81,7 $ PD[ $ $ $ E S F ' ( H + ( / / S 4 Y Z \ = ș PP
PAGE 12
HEF40106B Nexperia Hex inverting Schmitt trigger 16. Abbreviations Table 12. Abbreviations Acronym Description DUT Device Under Test 17. Revision history Table 13. Revision history Document ID Release date Data sheet status Change notice Supersedes HEF40106B v.8 20151210 Product data sheet - HEF40106B v.7 Modifications: HEF40106B v.7 Modifications: • Type number HEF40106BP (SOT27-1) removed. 20111121 • • Product data sheet - HEF40106B v.6 Legal pages updated.
PAGE 13
HEF40106B Nexperia Hex inverting Schmitt trigger 18. Legal information 18.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.
PAGE 14
HEF40106B Nexperia Hex inverting Schmitt trigger Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Non-automotive qualified products — Unless this data sheet expressly states that this specific Nexperia product is automotive qualified, the product is not suitable for automotive use.
PAGE 15
Nexperia HEF40106B Hex inverting Schmitt trigger 20. Contents 1 2 3 4 5 6 6.1 6.2 7 8 9 10 11 12 13 14 15 16 17 18 18.1 18.2 18.3 18.4 19 20 © General description . . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 1 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . . . . .