User's Manual

25
your phone number or set voice mail
Divert if busy: When the call is busy, the transfer of all
voice calls to your phone number or set voice mail
Divert all data calls: Transfer all the data calls to the
phone number you set, this function is supported by the
network operator, please contact the network operator.
Cancel all diverts: cancel all call forwarding type.
Call barring:
Set limits each case to answer or dial the phone. Network
operators must first apply for international calling features,
and limit access network password, to set the limit
function.
This function needs the support of network operator,
please contact the network operator.
Call restrictions can be set for activate, deactivate and
query status
Line switching:
Can switch to Line 1 or Line 2, Line 1 is default, if you
choose line 2, then there may be no phone call.
- Common call settings
Call time reminder:Can set the prompt type:
Off: When the phone call, no minutes of tone.
Single: Select 1-3000 seconds after the prompt enter
either of the time, when you call the phone at the time
when prompted.
Periodic: Select 30-60 seconds after the input in any one
time, when you call for every minute the phone will be
reminded of the time.
Auto redial:
You can enable or disable this feature, the feature is
turned on, after the dial-up, then if the other party does not
answer the phone over a period of time will be
26
automatically re-dial, redial the number up to 10 times, in
this period, the user can not call any other phone , to end
the re-dial, simply press the right soft key to cancel.
IP number: You can edit IP number with three at most.
Select one and press the OK key or press the Left soft key
[Options] to select ‘Edit’ option, then edit the IP number,
press the OK key or press the Left soft key to confirm and
the current IP number is both activated.
For the edit IP number, you can press the Left soft key
[Options] to select ‘Activate’ option.
Answer mode:
Any key: Select the feature, all incoming calls, in addition
to the red key and right soft keys, all keys can answer the
call
Auto answer : Enable this feature, there are about 2
seconds after the incoming call, the phone will
automatically answer the call.
7.6 Network settings
You can select SIM1 or SIM2 to set the network options.
·Network selection: Choose to Automatic or Manual select
network. If automatic selection, the phone will select the
current network where your SIM is registered to. If manual,
your phone will search for and list down available networks for
your selection, note that you must select the network where
your SIM is registered to.
·Preferred networks: Set or modify your preferred network. It
will display the network preference list as stored in your SIM.
7.7 Network status
View the SIM card network status.