User's Manual

9
1 Receiver 7 Ke
yp
ads
2 LCD screen 8 Phone
b
oo
k
3 Navi
g
ation ke
y
9 Ke
y
to Faceboo
k
4 Call 1 ke
y
10 End ke
y
5 MSN 11 S
p
eake
r
6 Call 2 ke
y
12 Camera
12 11
10
3. Preparation before Use
Install SIM Card
When registering mobile phone number, you
can apply for two different phone numbers, two
different mobile phone network service providers
and thus obtain two SIM (Subscriber
Identification Module) cards.
With these two SIM cards, you can use all
functions of your mobile phone. The SIM cards
save the parameters needed for communications
and personal data, including PIN (Personal
Identification Number) code, phonebook, short
message and other extra system services.
Warning: Do not distort or scratch the SIM card
nor let it contact static, dust or moisture. If it is
lost, please contact immediately your network
operator for help.
Before SIM card installation, please switch
off the mobile phone. The SIM card is installed
on the back of the mobile phone.
Follow the following diagram to install the
SIM card. Please insert the host SIM card into the
SIM1 slot and the slave SIM card into the SIM2
11
slot.
Note: If SIM card is inserted only into the
SIM1 slot, then only the host works; likely, If
SIM card is inserted only into the SIM2 slot, then
only the slave works. When two SIM cards are
inserted into the SIM1 slot and SIM2 slot
respectively, you can choose work mode freely as
you wish.
Note: As the SIM card is small object, keep it out
of children’s touch or prevent children gulping it!
SIM1
SIM2
12
Install Memory card
As the mobile phone does not have enough
storage space, to use some functions, you need to
install a memory card (This mobile phone use
T-FLASH card.)
Install T-FLASH card: Open the back cover
to take out the battery, release the T-Flash card
lock, insert the T-Flash card into its slot, and
restore the lock and the battery before restarting
the mobile phone.
Memory Card