User's Manual

27
5. Basic operation
Switch on
Press the switch-on/off key to start the
mobile phone, then the screen will display
switch-on image. Then you can enter
Settings menu to set phone modes,
including SIM1 & SIM2 On, Only SIM1 On,
Only SIM2 On and Flight. The defaulted
one is Only SIM1 On.
After insert SIM card, the mobile
phone will automatically check the SIM
card availability, and then it will be shown
information as following on the display by
sequence:
1. “Input phone password”——If you
have set the password.
2. “Input PIN” —— If you set SIM card
password.
3. “No service”—Indicates fail to make
register and cannot make any calls.
4. “Emergency calls only”—indicates
28
has registered to other network and
only can make call to 112.
5. “Searching”—the mobile phone is
searching network until find
appropriate network;
6. “Operator name”—Indicates network
successfully registered.
Note: If you do not know PIN code,
please contact the network service
provider.
The defaulted phone password
“1122”.
Switch off
To switch off the mobile phone, press
the end key. When the screen displays
switch-off cartoon, the host and the slave
will be off at the same time. Do not take
out the battery to switch off the mobile
phone. If so, the SIM card can be
damaged easily and some data will be
lost.
Dial a Call
 With the number keypad, you can
enter phone numbers (if wrong
characters are input, press the clear