User's Manual

89
convenient input modes, which can
support the use of other functions.
Basic letter input
After “abc”/“ABC” is chosen, input
your desired letters with the standard
keypad. By pressing “Aa” key you will
change from one input method to
another. You can type a capital letter by
pressing ”×” key followed by the letter
you wish to type in capital letter.
Number input
This mode is mainly used to input
phone numbers etc. After “number” is
chosen, you can input digit into the place
where the cursor is flickering. To get into
this mode, you should press “Aa” key
several times until the phone goes into this
input mode.
Symbol input
In any of the above input modes, you
are provided with symbol input. If you
cannot see symbols, press “sym” key to
see them. If you want one symbol, press
90
the up/down/left/right key to choose.
8. Use of USB
Notices before use
 Always connect and stop USB device
correctly.
 Never use Windows formatting
command to format the mobile disk
of the mobile phone; otherwise, it will
be damaged severely.
 USB work environment:
o Windows2000 / XP.
o For other operation systems, the
connection between PC and the
mobile phone cannot be
conducted unless USB driver is
installed.