User's Manual
13
Note:Asthe T‐FLASHcardissmallobject,keep
it out of children’s touch or prevent children
gulpingit!
InstallBattery
The mobile phone is suitable for o riginal
battery and accessories. When the battery is
idle, it is recommended to put it into the
protectionbox.
Followthefollowingdiagramtoinstallthe
battery.
T-flash card
14
Note:Do installthebatteryas perthediagram
so as prevent the battery contact patch being
damaged.
ChargeBattery
Thenew batterycannotreach the optimal
efficiency unless it has undergone several
continuouscompletechargesanddischarges.
When the battery is used up, charge it in
time.Over‐dischargecandamagethebattery.
Afterthebatteryischargedfull,cutoffthe
connectionofchargerwiththeACpowersupply
andtheconnectionwiththemobilephone.
Follow the following diagram to connect
thecharger.
Battery
15
During charging, the battery capacity icon
onthe screenflickersfromtherighttotheleft.
After the batteryis chargedfull, the iconis full
ofbars.Slightheatduringchargingisnormal.
Warning: When a travel charger and its
accessories are used to charge the battery,
please firstly check if they are original or
recognized by the original manufacturer. The
use of other ac cessories may damage your
mobilephoneandcauserisks!Alwaysusethem
indooranddryplaces.
Noticesonusingthebattery
Theperformance ofthebatteryisaffected
bymanyfactors,includingradioba rriernetwork
settings, signal strength, signal strength, work
temperature, chosen and used functions or
settingsaswellasphoneaccessories,tone,data
orotherapplications.
For optimal performances, please follow
16
therulesbelow:
Newbatteryorthebatteryhavingbeenidle
for long need charging for long. The
standard voltage scope for the battery is
3.7V‐4.2V.
During charging, keep the battery at room
temperatureorsimilartemperature.
With time passing by, the battery will
gradually be worn and thus need longer
time to charge. This is normal. However,
after normal charging, if call duration
decreasesbut chargingtime increases, you
need to buy another battery from the
original manufacturer or authorizedby the
original manufacturer. The battery of
interior quality can damage your mobile
phoneandcausedanger!
If the phone is overused at low battery
when charging, there might need a longer
time for the charge indicator to be shown
onthescreen.
Note: Please dispose the battery according to
the local regulations. Try to recycle thebattery
as possible. Do not treat the waste battery as
commonwaste.
Warning: Do not throw the batteryinto fire so
17
as to prevent fire. The broken battery may
causeexplosion.
Warning
Charging the mobile phone by
improper means can cause to explosion.
Always refer to the related regulations for
thedisposalofthebattery.
PINcode
PIN1 Code: Itisthepersonalidentification
numberused to enterSIM and ableto prevent
others using SIM1 without permission. If the
mobile phone has activated the PIN1 code
protection,when the mobilephoneisswitched
on, the screen will display “Input PIN”. In the
process of inputting PIN1
code, the screen will
use “*” to represent the input content. While
obtainingSIM,youcanobtainitsPIN1code.
PIN2 Code: It is the personal identification
numberusedforsomespecialfunctionssuchas
paidcalletc.
PUKCodeandPUK2Code(8‐digit)
To change the locked PIN code,
you need
to use PUK (Personal Unblocking Key) code. To
change the locked PIN2 code, you need to use
18
PUK2code.Ifthesetwocodesarenotprovided
together with the SIM cards, ask the local
serviceproviderforthem.
Warning: If the PIN code is input wrongly for
successively three times, the SIM card will be
locked. Please contact the network operator
immediately for help. Attempt to unlock the
codemaymaketheSIMcardineffectiveforever!
4.GeneralInstructions
Dialkey
Itisusedtodialacall(withphonenumber
entered or in phonebook state) or receive an
incomingcall.Instandbystate,pressthiskeyto
display the latest call register (SIM1 and SIM2
support respectively 20 call entries, including
received calls, missed calls and dialed calls). In
dual‐SIM
standby mode, pressthis key to have
an option menu on which you can choose to
operateviaSIM1orviaSIM2.
Switch‐on/offkey/Endkey
Incallstate,itisusedtointerruptacall;in
callconversationstate,itisusedtoendacallor