User's Manual

37
Smartdial.
Addnewcontact
YoucansavephonenumbersontoSIMcard,
phone, or existing contact. On SIM card, one
entryhasonlynameandphonenumber.Onthe
phone,onecontactcanincludeName,Number,
HomeNumber,CompanyName,EmailAddress,
OfficeNumber,FaxNumber,Birthday,Associate
Picture, Associate Sound and Caller Group.
On
existing contacts can add numbers to existing
contactearlier.
Tip: If one contact is set with photo link, tone
link and callers’ group at the same time, then
thecallers’groupfunctionwillbeinactive.
Callergroups
You can set call tone, photo and members for
five callers’ groups. Callers’ group member can
onlycomefromthenumbersavedonphone.
Speeddial
Set the number as the speed dial, and set the
function on or off.
38
Blacklist
Set the blacklist number and set the function on or
off to have the function.
Copycontacts
Copy the contacts from the SIM to Phone or Phone
to SIM.
Movecontacts
From SIM card to Phone or from Phone to SIM
card.
Deleteallcontacts
From the phone or SIM card to delete the contacts.
Phonebooksettings
SIMcardownernumber:Setthenumberto
havethefunction.
SIM voice dialing: Refer to the numbers to
havethefunctions.
Memory Status: You can view the current
use status of the phonebook, including
39
SIM1, SIM2 and phone memory. The
displayformatis“Used/Total”.
Fields: Choose the related function as the
functionOnorOff.
Preferred Storage: You can choose the
storagepathforthecurrentnumber.
Human voice prompt: Set the function on
orOff.
Fields: You can choose thedisplayitems in
thephonebookand thedisplayitemsinthe
AddContactinterface.
My vCard: You can edit and send my
businesscard.
Vcardversion:includingvcard2.1andvcard
3.0
SOSnumber:Setthedesirednumberasthe
SOSnumber.
Messages
Textmessage
SMS is a kind of network ser vice that
cannot be used to send and receive short
messages until you apply to the network
operator.
Both SIM cards of the mobile pho ne can
send and receive SMS. The SMS is sent to the
40
SMScenterofthenetworkandthensentbythe
network to the target user (GSM user). If the
user does not switch on the mobile phone or
the mobile phone cannotreceive the SMS(the
memory is full), the network will save the SMS
temporarily. The duration of storage depends
on sender’s settings and network service
provider.
With this function, the mobile phone can
send and receive chain text messages, which
may affect the message fees. For more
information,pleaseconsulttheserviceprovider.
WhentheSMScapacityisfull,therewillbe
anSMSiconflickeringonthestandby
interface.
The full capacity can affect SMS reception.
DeletesomeSMStosolvetheproblem.
If the other party has received SMS, you
willhearthealertsoundfromthemobilephone
(ifsuchalertfunctionissetasON)
Note:WhensendingSMSviatheSMSnetwork,
the mobile phone display “Message sent”. It
indicates that the SMS has been sent to the
SMS center inbox set in the mobile phone but
does not mean the receiver has received the
SMS. For more information, please consult the
serviceprovider.
WriteMessage
41
Youcanwritemessageinthismenu.
To write SMS, press “A/akey to switch
inputmodes,“symkeytoselectSymbol;
press
“del key to clear one character before the
cursor, long press “del key to delete all
characters; press the end key to back to the
standbyinterface.
Themobilephone cansendthechainSMS
more than characters (limit for common text
messages). If the SMS contains more than 160
English characters, then the SMS will be split
into 2pcs or more. You can insert images,
cartoons,ringsetcintoSMS.However,theSMS
will not be received
and displayed unless the
network and the receiving mobile phone
support.
You can enter the phone number or
choosea number fromthe phonebookto send
the SMS. In dualSIM standby mode, you can
choosetosendtheSMSviaSIM1orSIM2.
Inbox
YoucanseetheSMSintheinbox.
Reply:YoucanreplytothereceivedSMS.
Delete:DeletethecurrentSMS/MMS.
Forward:YoucandirectlyforwardthisSMS
toothers.
42
Copytophone:You cancopytheentriesin
SIMcardontothephone.
Move to Phone: You can move the entries
inSIMcardontothephone.
DeleteAll:YoucandeleteallSMSininbox.
Copy all: You can have two options, i.e.
copyallentriesontheSIMcardintheinbox
ontothephoneorviceversa.
Move all: You can have two options, i.e.
move all entries on the SIM card in the
inboxontothephoneorviceversa.
Use number: Use this number to have the
callfunctionorSavetothePhonebookor
Sendtextmessage.
UseURL:Usethenetaddresswhenthereis
theURLinthemessage.
Chat: Choose the chat room to have the
chatfunction.
Moveto private:Movethemessageto the
privatebox,
Sort:Sortthemessagebytimeornameby
choosingthisfunction.
Outbox
Whilesending SMS, youcan choose“Save